What you are interested in is a Control Operator command. See <http://docs.allstarlink.org/drupal/node/18> <https://github.com/N4IRS/AllStar/blob/master/configs/rpt.conf> 73, Steve N4IRS On 9/27/2016 12:27 PM, Chris Viningre wrote:
I think I found human error to be the cause. I was not reentering the node number to turn off the link.
I do have another question. Is there a command or way to shut down the repeater romotly?
On Sep 27, 2016 4:29 AM, "Steve Zingman" <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Chris, You need to have the receive levels set so that the DTMF decoder gets the proper audio level.
On 09/26/2016 04:35 PM, Chris Viningre wrote:
No luck there either.
Chris Viningre 70 W. Roadrunner Salt Flat, Texas 79847 C:(915) 504-1510 <tel:%28915%29%20504-1510> chrisviningre@gmail.com <mailto:chrisviningre@gmail.com> Amateur Radio Operator: WS5B https://www.qrz.com/db/ws5b http://www.reverbnation.com/chrisviningre <http://www.reverbnation.com/chrisviningre>
On Mon, Sep 26, 2016 at 12:58 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Turn it down to about 3 KHz and try again.
On 9/26/2016 2:57 PM, Chris Viningre wrote:
Thanks Steve, I use the meter in simpleusb and it was above 5kz. I turned it up to see if it made a difference. It didn't. I don't have a service monitor so i'll have to wait. I think the club has one I can use. Chris Viningre 70 W. Roadrunner Salt Flat, Texas 79847 C:(915) 504-1510 <tel:%28915%29%20504-1510> chrisviningre@gmail.com <mailto:chrisviningre@gmail.com> Amateur Radio Operator: WS5B https://www.qrz.com/db/ws5b http://www.reverbnation.com/chrisviningre <http://www.reverbnation.com/chrisviningre>
On Mon, Sep 26, 2016 at 12:23 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Well, You may not be sending enough audio to the DTMF decoder. <http://docs.allstarlink.org/drupal/node/92 <http://docs.allstarlink.org/drupal/node/92>>
On 9/26/2016 2:19 PM, Chris Viningre wrote:
I just connected to the link repeater system I'm planing to use. I'm unable to disconnect. A local ham reported good sound. The only sound settings I did was to turn up the transmit in simpleusb-tune-menu. I didn't set any receive audio. Chris Viningre 70 W. Roadrunner Salt Flat, Texas 79847 C:(915) 504-1510 <tel:%28915%29%20504-1510> chrisviningre@gmail.com <mailto:chrisviningre@gmail.com> Amateur Radio Operator: WS5B https://www.qrz.com/db/ws5b http://www.reverbnation.com/chrisviningre <http://www.reverbnation.com/chrisviningre>
On Mon, Sep 26, 2016 at 12:09 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
*12100 does not disconnect? Did you set receive audio levels?
On 9/26/2016 2:07 PM, Chris Viningre wrote:
This is strange. now its connecting but I cant disconnect without rebooting the server. Chris Viningre 70 W. Roadrunner Salt Flat, Texas 79847 C:(915) 504-1510 <tel:%28915%29%20504-1510> chrisviningre@gmail.com <mailto:chrisviningre@gmail.com> Amateur Radio Operator: WS5B https://www.qrz.com/db/ws5b http://www.reverbnation.com/chrisviningre <http://www.reverbnation.com/chrisviningre>
On Mon, Sep 26, 2016 at 11:47 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
*32100 does not connect to node 2100?
On 9/26/2016 1:36 PM, Chris Viningre wrote:
I am running a node on my repeater. Its a new setup using a URI and Dial software. I can call the phone number and get to my node. It will let me talk on the repeater but the only commands I can use is *99 to transmit and *70 for status. I cant connect to another node or any other commands. Coming in on a HT I can only use *70 and no other commands will do anything.I am new at this so any and all help would be great.
Chris Viningre 70 W. Roadrunner Salt Flat, Texas 79847 C:(915) 504-1510 <tel:%28915%29%20504-1510> chrisviningre@gmail.com <mailto:chrisviningre@gmail.com> Amateur Radio Operator: WS5B https://www.qrz.com/db/ws5b http://www.reverbnation.com/chrisviningre <http://www.reverbnation.com/chrisviningre> _______________________________________________
-- "Did you enable that in modules.conf?"