or maybe MGCP if youre not dislexic like I was there ... :-) From: telesistant@hotmail.com To: eric@efratnetworks.com; app_rpt-users@ohnosec.org Date: Fri, 27 Apr 2012 08:25:17 -0700 Subject: Re: [App_rpt-users] VoIP telephone "wire line remote" for Allstar well, if you want a soft key for "assert PTT" and one for "unassert PTT", you could do it easily by making them make DTMF sequences (*9 and #, actually), and have the dialplan for the SIP phone invoke app_rpt with the 'P' parameter, the same way the Allstar portal does it. Dont expect a soft key on a SIP phone to be able to do much else. Regardless of anything else SIP phones do not give you an 'event' or status for 'both' states of a buffon (such as 'button pressed', 'button released'). You are more likely to get something like this with an MCGP phone, if someone wants to 1) make chan_mgcp work with whatever phone you may have, and 2) have the 'button events' change the keying status towards/within app_rpt. Would be a hack job at best. JIM From: eric@efratnetworks.com To: app_rpt-users@ohnosec.org Date: Fri, 27 Apr 2012 09:39:35 -0400 Subject: [App_rpt-users] VoIP telephone "wire line remote" for Allstar Folks - Has anyone made a software modification to Allstar to allow using a VoIP telephone hardware as a "wire line remote" node? I am thinking it would be nice to access my node on VHF from my ham shack using wire line control using a Polycom, Snom, or some similar telephone. PTT could be on one of the soft keys. A hardware version of the IAX_RPT? Another idea may be to take an old DC wire line control phone and connect a URI to it. 73, Eric 4Z5UG _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users