Jim, I would go into the CLI - asterisk -rvvv and see if there are any messages when this happens. You said you saw an error, what is the error? Also how do you have the URI connected? Directly? Have you used it with another computer where it does work? Does it show as registered in the system? Check before and after - lsusb Does it do it if the URI is connected to a radio or not? 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Mon, 7 Apr 2014 17:16:05 -0700 From: 41.2jim@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] connection issue I have a node that will worl for 1 tx cycle and then the URIx green lite stops flashing and I get a usb error I have tried two different computers and with the same problem if I restart asterisk it will work for one TX cycle only then the URIx will drop out again and not work ???any ideas?? Jim Frederick KF6QBW I Live to Transmit & Transmit to Live 446.600- 103.5 PL Repeater AllStar Node # 28839 Skype = jim41.2 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.