Thanks for the info.. If I have 2 node on the same computer do I need to put the archivedir=/var/snd argument in both node stanza in rpt.conf or just once in the rpt.conf file not in a node stanza? -----Message d'origine----- From: David McGough Sent: Wednesday, September 30, 2015 9:45 AM To: Jeff Carrier Cc: Pete M ; APP RPT Subject: Re: [App_rpt-users] think I asked wrong.. Until proven otherwise (meaning: you've clearly identified someone interfering), don't rule out spurious intermod and/or other dirty nearby transmitters. I've had this exact scenario several times and found some surprising causes---like a trucker with a very dirty and loud CB radio that was briefly keying a Kenwood TKR-850 (UHF!!!) even with receive PL tone enabled! This would happen for several minutes at a time, while he drove thru the area! As for logging transmission info, in the repeater stanza in /etc/asterisk/rpt.conf, try setting the parameter: archivedir=<directory path to save files> Then, you'll have a good quality audio and telemetry log of what's going on. Note that on my systems, I've made a new directory using (from the command prompt): mkdir /var/snd chmod 1777 /var/snd Then, in rpt.conf I've got: archivedir=/var/snd Good luck chasing the interference. Persistence pays off. 73, David KB4FXC On Wed, 30 Sep 2015, Jeff Carrier wrote:
I usually just remotely change the input ctcss tone and they usually disappear.
On Wed, Sep 30, 2015 at 7:03 AM, Pete M <petem001@hotmail.com> wrote:
Hi.
We have someone on the repeater doing multiple small tx on a random pattern (this can last 10 minute at a time) so all we ear is the telemetry of the repeater and it kind of get on the nerve of many.
We did lower the audio level of the telemetry were we almost dont ear it, yet the bozo continu on tx ing short (less then a second) ptt..
We are building some DDDF ( digital Doppler direction finder) that will monitor the input freq of our 2 repeater and will logs the bearing of at least 4 of them on a central server with time stamps..
I need a way to extract from asterisk when someone do make a lots of short ptt and compare them to the logs from our DDDF. that way after some data collection we will see if the offender is on the move or mostly at the same place. and at the same time we will see if it is random or if there is some kind of pattern in time so that we will be able to find the offender and finally be done with it.. this been going on for years..
Anyone can point me ia way to extract such data from asterisk ? or find a way with action command to put that kind of stuff in a file?
Thanks
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.