Hi, I am a newcomer to Allstar and have just set up my node this week. I had a few wrinkles that I was able to iron out in time by reading the archives, but I haven't been able to fix the following problem. My node has a squelch tail that won't go away and seems to cycle constantly once it gets going. I'm using a URI to a Kenwood TM-D700a and my node is in simplex mode. I still think I may have bugs in my tuning area. My config is pasted below and I would love any help that anyone could provide. Thanks & 73. Bobby KF4GTA ## rpt.conf ## [27633] ; Change this to your assigned node number rxchannel=Radio/usb27633 duplex=0 erxgain=-3 etxgain=3 ;controlstates=controlstates scheduler=schedule27633 morse=morse27633 macro=macro27633 functions=functions27633 phone_functions=functions27633 link_functions=functions27633 telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iKF4GTA accountcode=RADIO hangtime=100 althangtime=100 totime=170000 idtime=540000 politeid=3000 idtalkover=|iKF4GTA unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 ;nolocallinkct=0 ;eannmode=1 ;connpgm=yourconnectprogram ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct=0 ;holdofftelem=0 beaconing=0 ## usbradio.conf ## [general] [usb27633] hdwtype=0 rxboost=0 txboost=1 rxctcssrelax=1 txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 ;rxctcssoverride=0 carrierfrom=usb ctcssfrom=usb rxdemod=speaker txprelim=yes txlimonly=no txtoctype=notone txmixa=composite txmixb=no invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=0 #includeifexists custom/usbradio.conf ## usbradio_tune_usb27633.conf ## [usb27633] ; name=usb27633 ; devicenum=0 devstr=3-1 rxmixerset=1000 txmixaset=200 txmixbset=500 rxvoiceadj=0.149018 rxctcssadj=0.500000 txctcssadj=200 rxsquelchadj=1