...LOL... Adjusting your audio to make others readable, to me, is a very bad move. But I understand being a scouting event, you do what you can. But if poor audio stations are not forced to fix their error, they won't. ...mike/kb8jnm On 10/21/2018 4:14 PM, David McGough wrote:
Ed,
I just participated in the scouting JOTA event as well. Yes, the audio levels were all over the board, from clipping on every syllable to quieter than a mouse. I think many/most of these stations where coming in via echolink, not natively via AllStar, etc.
Unfortunately, there isn't any easy fix for this. The linkmongain setting won't fix this, it is only for monitor mode (connecting with *2).
Telemetry ducking features are not implemented in the stock code release, as far as I know.
73, David KB4FXC
On Sun, 21 Oct 2018, Edbathgate wrote:
I was doing a scouting event, and experienced a number of the tx-ing stations with low audio, so I was cranking my volume and straining to hear the other stations, when a blasting disconnect message comes through.
I found settings of how to block the connect/disconnect messages.
There used to be 'ducking' settings in the Xipar distribution of allstar. Telemnomdb=-10, Telemduckdb =. -15. Do these still exist?
I just found linkmongain variable. Mine was still at zero. I may jack that up to compensate for low hub audio.
Anybody have suggestions to adjust the rx audio/hub audio/telemetry radios without severely blasting other users when I am connected into a hub?
Ed N3SDO _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.