1 Jan
2016
1 Jan
'16
12:30 a.m.
What I believe I've learned... I've not checked this on ACID, but I just completed converting from usbradio to simpleusb using DIAL on an RPi, and found I had to increase the levels by about 2 dB (60% increase) to get the same response from the radio. This was for both the rx and tx values. usbradio worked as before on the replaced ACID box. I found the RPi handled the usbradio processing load quite well, and received compliments on the audio quality. Thanks, r/Bob kk6ecm