The default 1,3,5 servers should work just fine. As you can see the naeast and nasouth are just referred back to server3. From the echolink site: Where are the servers located, and how are they managed? The primary servers are located in Tier 1 hosting facilities in Atlanta, GA, and Scottsdale, AZ, each with OC-3 connections to the Internet. These facilities are staffed 24/7 and are equipped with emergency power. Secondary servers are located in Stamford, CT, and Ridgefield, CT. It is estimated that this arrangement of servers can support about 5 times the current worldwide load. Ping the servers as I did below to see if you have connection. Also make sure your port forwarding is setup correctly in your router for echolink. [root@WA3DSP_Allstar asterisk]# ping server1.echolink.org PING server1.echolink.org (174.129.36.165) 56(84) bytes of data. 64 bytes from ec2-174-129-36-165.compute-1.amazonaws.com (174.129.36.165): icmp_seq=1 ttl=42 time=27.2 ms [root@WA3DSP_Allstar asterisk]# ping server3.echolink.org PING server3.echolink.org (174.129.209.125) 56(84) bytes of data. 64 bytes from ec2-174-129-209-125.compute-1.amazonaws.com (174.129.209.125): icmp_seq=1 ttl=42 time=22.6 ms [root@WA3DSP_Allstar asterisk]# ping server5.echolink.org PING server5.echolink.org (68.178.144.151) 56(84) bytes of data. 64 bytes from ip-68-178-144-151.ip.secureserver.net (68.178.144.151): icmp_seq=1 ttl=51 time=81.5 ms [root@WA3DSP_Allstar asterisk]# ping naeast.echolink.org PING server3.echolink.org (174.129.209.125) 56(84) bytes of data. 64 bytes from ec2-174-129-209-125.compute-1.amazonaws.com (174.129.209.125): icmp_seq=1 ttl=42 time=22.0 ms [root@WA3DSP_Allstar asterisk]# ping nasouth.echolink.org PING server3.echolink.org (174.129.209.125) 56(84) bytes of data. 64 bytes from ec2-174-129-209-125.compute-1.amazonaws.com (174.129.209.125): icmp_seq=1 ttl=42 time=19.0 ms 73 Doug WA3DSP http://www.crompton.com/hamradio From: petem001@hotmail.com To: steve@m0hoy.com; app_rpt-users@ohnosec.org Date: Wed, 3 Dec 2014 11:15:03 -0500 Subject: Re: [App_rpt-users] Echolink Parsing Errors change the server for echolink in the echolink.conf file the normal server in the conf file is: server1=server1.echolink.org server2=server2.echolink.org server3=server3.echolink.orgChange that to the server you use for your own setup like for me its: server1=naeast.echolink.org server2=nasouth.echolink.org server3=servers.echolink.org From: steve@m0hoy.com Date: Wed, 3 Dec 2014 08:55:36 +0000 To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Echolink Parsing Errors Hi All, I am trying to set up echolink on on the BBB 1.2 but I keep getting the following parsing error on all servers: server1.echolink.org[Dec 2 17:50:18] ERROR[1522]: chan_echolink.c:2410 do_el_directory: Error in parsing header on Does anyone know what I am doing wrong!? Many thanks Steve M0HOY Sent from my iPhone _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.