I don't know if I asked.this or.not, but what will this upgrade procedures do to us that are also running chan_irlp? Jim / K6JWN ------Original Message------ From: Stephen Rodgers Sender: app_rpt-bounces@lists.illiana.net To: Asterisk Repeater Controler ReplyTo: Asterisk Repeater Controler Subject: [App_rpt] ACID update procedure to install latest version ofAsterisk Sent: Oct 11, 2008 8:56 PM A later version of asterisk is available for ACID installs. These upgrade instructions must be followed to the letter. 1. Change directories to /root 2. If you don't have an astupd.sh file STOP. Your ACID install is too old and you will need to do a fresh install which will install the latest version automatically. If you have to re-install, make a backup of your config files in /etc/asterisk so that you can restore them to the new install. 3. If you have an astupd.sh file, you will need to update it by downloading a new version. Use the following wget command from the /root directory to do this: wget http://dl.allstarlink.org/installcd/astupd.sh 4. Once the new script is downloaded, type: ../astupd.sh 5. Your system will now be updated. Wait for the download and compile to complete. 6. Reboot your system and check to see that your node is functioning properly. Steve WA6ZFT _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt Sent from my Verizon Wireless BlackBerry