Enable the echolink channel driver in /etc/asterisk/modules.conf Change: noload => chan_echolink.so To: load => chan_echolink.so ; On 12/26/2017 12:45 PM, Steve Siesel wrote:
All,
I am trying to add echolink to my ASL install (Dial). I read the ASL FAQ’s and added the echolink.conf. I also made sure the ports are open as well. Is there anything else I need to do besides adding echolink.conf in the /etc/asterisk directory?
Is there anything else I need to do?
[el0]
confmode=no
call=K4KSA-L ; Change this!
pwd=***** ; Change this!
name=Steve Siesel ; Change this to your real name!
qth=Seminole, Florida ; Change this to your actual QTH!
email=steve@siesel.net ; Change this!
maxstns=20
rtcptimeout=10
node=950077 ; Change this!
recfile=/tmp/recorded.gsm
astnode=46031 ; Change this to your active Allstar node number!
context=radio-secure
server1=server1.echolink.org
server2=server2.echolink.org
server3=server3.echolink.org
freq=145.000 ; Freq in MHz
tone=0 ; CTCSS Tone (0 for none)
lat=27.863859 ; Latitude in decimal degrees
lon=--82.833252 ; Longitude in decimal degrees
power=0 ; 0=0W, 1=1W, 2=4W, 3=9W, 4=16W, 5=25W, 6=36W, 7=49W, 8=64W, 9=81W (Power in Watts)
height=0 ; 0=10' ,1=20',2=40',3=80' ,4=160' ,5=320' ,6=640' ,7=1280',8=2560',9=5120' (AMSL in Feet)
gain=0 ; Gain in db (0-9)
dir=0 ; 0=omni, 1=45deg, 2=90deg, 3=135deg, 4=180deg, 5=225deg, 6=270deg, 7=315deg, 8=360deg (Direction)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.