But after a asterisk restart you do see it on the status page? On 7/15/2016 12:50 PM, Ramesh Dhami (VA3UV) wrote:
On 7/15/2016 12:37 PM, Steve Zingman wrote:
Ramesh, I assume from the asterisk cli prompt iax2 show registry looks something like this:
Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 2148 208.35.139.11:4569 60 Registered
Exit the CLI
cd /etc/asterisk wget https://github.com/N4IRS/AllStar/raw/master/configs/dnsmgr.conf
restart asterisk
Hi Steve:
Followed your recommendation above; after 5 mins or so, I still do not see my nodes on the status page (or appearing as active via node status in the Portal)
iax2 show registry shows:
Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 2424 208.124.214.227:4568 60 Registered 67.215.233.178:4569 Y 2182 208.124.214.227:4568 60 Registered
Cheers,
Ramesh.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic