Dont necessarily hate on your ISP... When one has a very low latency connection its a nice bit of luck.. you cant always rely on it. Certainly, having a nearly-zero latency network is always the best, when possible :-). Jim Subject: RE: [App_rpt-users] RTCM Date: Tue, 25 Sep 2012 00:05:33 -0600 From: jeff.carrier@rmsmsecurity.com To: telesistant@hotmail.com; tim.sawyer@mac.com; adamson_alan@hotmail.com CC: app_rpt-users@ohnosec.org OK, I had that thought and tried it….guess my ISP SUX! Will be better when we get it on the private WLAN I guess. From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Tuesday, September 25, 2012 12:02 AM To: Jeffrey S. Carrier; tim.sawyer@mac.com; adamson_alan@hotmail.com Cc: app_rpt mailing list Subject: RE: [App_rpt-users] RTCM then just shorten the buffer lengths (if you have short enough net lag times to do this validly) Jim Subject: RE: [App_rpt-users] RTCM Date: Mon, 24 Sep 2012 23:30:29 -0600 From: jeff.carrier@rmsmsecurity.com To: tim.sawyer@mac.com; adamson_alan@hotmail.com CC: telesistant@hotmail.com; app_rpt-users@ohnosec.org Ok, looks like I have it up and running. All the audio levels are ok now and it’s transmitting/receiving. The issue that slaps me right in the face is my own audio that I hear when I unkey. If I do a “Test 1,2,3” when I unkey I hear myself saying “2, 3” It’s set up in a non voting stand alone mode right now. 73 de k0jsc From: Tim Sawyer [mailto:tim.sawyer@mac.com] Sent: Monday, September 24, 2012 6:17 PM To: Alan Adamson Cc: 'Jim Duuuude'; Jeffrey S. Carrier; 'app_rpt mailing list' Subject: Re: [App_rpt-users] RTCM Do you have more than one RTCM? If so did you change the serial number(s)? The serial number determines the MAC address and therefore must be unique. -- Tim :wq On Sep 24, 2012, at 2:23 PM, Alan Adamson <adamson_alan@hotmail.com> wrote: Ok, so I give, how do you update the firmware on one of these? I have the same issue from time to time, what solves it is to point the rtcm to some fictitious IP address for about 3-5 minutes and then back to the correct address and then all will work just fine. What's odd about when it happens is that the packets are still coming to the allstar server, and being authenticated, but the rtcm never see them returned… I'm sure it has to do with the udp packet traversal stuff. Alan From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim Duuuude Sent: Monday, September 24, 2012 4:18 PM To: jeff.carrier@rmsmsecurity.com; app_rpt mailing list Subject: Re: [App_rpt-users] RTCM are you using the latest firmware and app_rpt sources from SVN?
Date: Mon, 24 Sep 2012 13:41:07 -0600
From: jeff.carrier@rmsmsecurity.com
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] RTCM
Can anyone provide any guidance on this issue?
<System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
<System Time Not Set> Host Connection established (Pri) (10.0.0.35)
<System Time Not Set> ERROR! Host response timeout
<System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
<System Time Not Set> Host Connection established (Pri) (10.0.0.35)
<System Time Not Set> ERROR! Host response timeout
<System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
<System Time Not Set> Host Connection established (Pri) (10.0.0.35)
<System Time Not Set> ERROR! Host response timeout
<System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
<System Time Not Set> Host Connection established (Pri) (10.0.0.35)
<System Time Not Set> ERROR! Host response timeout
<System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
<System Time Not Set> Host Connection established (Pri) (10.0.0.35)
<System Time Not Set> ERROR! Host response timeout
<System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
<System Time Not Set> Host Connection established (Pri) (10.0.0.35)
<System Time Not Set> ERROR! Host response timeout
<System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
<System Time Not Set> Host Connection established (Pri) (10.0.0.35)
<System Time Not Set> ERROR! Host response timeout
<System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
<System Time Not Set> Host Connection established (Pri) (10.0.0.35)
I've changed the buflen parameter and still no joy. Ping times are no
more than 150 ms between the server and rtcm.
Thanks K0JSC
-----Original Message-----
From: app_rpt-users-bounces@ohnosec.org
[mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Ramesh Dhami
(VA3UV)
Sent: Saturday, September 22, 2012 9:17 PM
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Configuration of multiple nodes
On 22/09/2012 10:50 PM, Matthew Pitts wrote:
Good evening,
I will be using the ACID installation cd to set up my first permanent
AllStar Link server and am wondering how to configure the system so that
the hub node and its three branch nodes come up connected from the
beginning. I have been running a single node in a virtual machine off
and on for about a month now and uave most of the parts ready to do the
live system. Feel free to give suggestions; I'm willing to learn the
best way to do things, even though I've been around Linux almost 18
years.
<-- In the node stanza in rpt.conf add the following:
startup_macro=*5100
Then edit or create a new [macro] stanza - example:
[macro]
100 = *912329#
In this example, the node @ start-up will call macross 100; macro 100
creates a permanent link to node 2329. Since you want to link to 3
branch nodes, you can add multiple nodes in the macro - e.g:
100 = *912329*911200*911300#
HTH.
Cheers,
Ramesh.
www.freestar.us
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users