In rpt.conf under [nodes] what do you have. It should look like this. [nodes] ; Note, if you are using automatic update for allstar link nodes, ; no allstar link nodes should be defined here. Only place a definition ; for your local nodes, and private (off of allstar link) nodes here. 2063 = radio@127.0.0.1:4570/2063,NONE ; This must be changed to your node number 2064 = radio@127.0.0.1:4570/2064,NONE,y 2080 = radio@127.0.0.1:4570/2080,NONE,y 2081 = radio@127.0.0.1:4570/2081,NONE,y ** I use 4570 for my iax port. I might need 4569 for your port. RPT checks rpt.conf first then rpt_extnodes. If you are using rpt_extnodes then it might be routing out to your public address and your router might not like that. David On Sat, Dec 18, 2010 at 7:07 PM, Bob Bunter <hammradio@charter.net> wrote:
What's the secret as to getting Two Different Nodes on the same Box to connect and talk to each other?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users