Bob: You could use system states ... one command from the console or one DTMF command can enable / disable the repeater. Check rpt.conf for system states. I use it. ...STeve - KF5VH On 5/26/2017 10:28 AM, Bob Pyke wrote:
I have a need to temporarily disable the repeater, then enable it. Timing is critical, so a delay is undesirable. What is the best way to accomplish this? I will be logged into the node.
Thanks, Bob Sent from my iPhone _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--- This email has been checked for viruses by AVG. http://www.avg.com