ok , I have some problem here.. Since my t5630 flash drive have a connector that is exactly like the connector that usely is on the end of a ide 44 pin cable I cant connect it to my usb adaptor and dd the limey image to the flash drive. so I have to do it from the machine itself. so to do so I downloaded ubuntu live cd to boot from a dvd reader and I have limey tar file on a usb stick. I try to find where the hell in monted the damn ide flash disk and just cant.. I do have an Icone on the desktop but its a symlink and cant find where its pointing.. So I am right now downloading the centos 5.5 live dvd, hoping it will be more clear where the damn thing is.. I tried ide0 no go, ide1 not better.. Anyone can help?? And By the way Have a merry Xmass to everyone on the list Pierre Martel VE2PF From: Jim Duuuude Sent: Wednesday, December 21, 2011 3:55 PM To: petem001@hotmail.com ; app_rpt mailing list Subject: RE: [App_rpt-users] Limey Linux on a HP T5630 Thin Client The probably easiest way to get an answer to your question is to determine it emperically. Download the following image: http://stats.allstarlink.org/limeylinux/downloads/cfimg-i586-via-1.1.5.tar.g... and IMAGE copy it (after un-tarring) to the flash drive (using dd or equivalent). If it boots, and "talks" to the ethernet, etc, then it works. Otherwise, it doesnt. JIM WB6NIL -------------------------------------------------------------------------------- From: petem001@hotmail.com To: app_rpt-users@ohnosec.org Date: Wed, 21 Dec 2011 15:46:27 -0500 Subject: [App_rpt-users] Limey Linux on a HP T5630 Thin Client I Have a few T5630 thin client that was donated to me (spec: 1ghz CPU , 1 gig of ram, 1 Gig flash drive) they have a VIA chipset that have Video , network, and audio device I am wondering if I could use that thin client with Limey to do a Allstar node AND an echolink node.. I would connect that to port 3 of my rc210 controler that I have for my 2 M and 70 cm repeater’s. If possible, how to i build the thing?? I know a few thing about Linux but I am no way a guru.. I do prefer a windows machine, but I know that Linux in more stable.. So is it possible or am I dreaming? forgot to tell you that there is a serial and printerl port to the machine you can see the spec there: http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01571963/c01... Pierre VE2PF _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users