Could your radio be configured to go into a power saving mode that is impacting the signals feeding your fob/URI ? It would be in one of the radio's menus. If so, disable it. tnx Mike / W5JR Alpharetta GA
On May 9, 2017, at 6:47 PM, TheSkyDancer (KD8TIG) <kd8tig@blazingstarradio.com> wrote:
Dial running on my raspberry pi 3 is for some reason triggering the radio to key up for about a second or so every 8 to ten seconds. I finally had to turn off the radio to get it to stop kerchunking. Is there some setting I could change to fix this? I’ve tried changing rx squelch to a higher number to see if something is barely breaking the squelch, but no luck. I also tried unplugging the radio from the usb radio interface. this does stop the kerchunking, but it doesn’t explain why it does it constantly when it is hooked up. It’s all a big mystery to me. I am using a Wouxun kg-uv6d ht for the radio. any help would be greatly appreciated. If I can provide further information I’d be happy to.
kind regards, Ben, (KD8TIG) _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.