My understanding pfSense rewrites the source port on outgoing packets. Not all router manufacturers do this. On Sun, Aug 12, 2018 at 10:15 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
Why do some nodes not have this problem? Is NAT somehow different from different routers? I'd really like to understand so I can take it back to the technical folks and explain why it needs to be put back the way it was.
On Sun, Aug 12, 2018 at 8:06 PM Danny K5CG <k5cg@hamoperator.org> wrote:
I'm running pfSense and I "could" setup a static port for the outbound NAT but since when does the source port ever match the destination port, for any protocol? I'm not touching it.
46679*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 46679 47.187.195.172:29961 60 Auth. Sent
4569 is what's set on the portal for my node. 29961 appears to be what is recorded on the server from my registration.
The portal port needs to be used or there has to be a way to set the port in rpt.conf to have that communicated to the registration server. Relying on the source port (which can be anything) is not a good idea.
Next steps?
Danny K5CG _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Bryan K6CBR bryan@k6cbr.us Allstar Base: 43918, 43991 Allstar Hub: 43919, 47036 www.k6cbr.us QRZ