George, What is the result of the Asterisk CLI command: iax2 show registry Lets start there On 07/16/2016 09:48 AM, George Csahanin wrote:
Stumped, maybe because I've played with this stuff a lot over the last 7 years...but...my ISP just changed my IP address. No longer can connect to anything and the last extnodes file was right before they made the change Thursday night. Might have been Wednesday, doesn't matter. There was nothing to change in the rpt.conf file, everything looks normal except the only obvious thing is that I'm not seeing rpt_extnodes updating. I put an entry in rpt.conf for a node I normally connect to (27891) and get /__auto_congest: Auto-congesting call due to slow response// /Checked port forwarding rules on the Verizon router, and is normal. I also *can* connect to usual nodes via the echolink port./(W8VT is 27849 and 606945 echo. echo works)
/Really stumped but operating under a medically induced handicap (fever). Anybody have any words of wisdom as to what I may be overlooking. Worked fine until Verizon re-did everything that night. /
/Again, thanks for bearing with me but this bug has me down and this isn't looking too clear to me.
GeorgeC W2DB 2360/
/
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic