Found an email from Doug Crompton from the beginning of this year where he mentions this how-to he wrote on using the asterisk dialplan to capture and act on non-defined DTMF strings. I haven't looked at it in much detail but a quick glance looks like it could be used for your purposes. http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/Allstar_extended_fun... Brett KQ9N On Sun, Nov 13, 2016 at 11:31 PM, Skyler F <electricity440@gmail.com> wrote:
Is it possible to parse DTMF strings without an individual command for each possible DTMF code? I would like a way to switch the frequency of a transceiver with serial frequency input (dra-818) via DTMF string.
I have not thought of a way to customize DTMF behaviour and not have static codes. This is a standard node, not remote base.
Here is an example of what I would like to do:
*98145145 = Change frequency to 145.145 MHz *97100 = Change CTCSS to 100.0 Hz
I Do NOT have to do this through RPT.Conf. If anybody can tell me a way of getting RAW DTMF data through shell, that would be really great!
73 Skyler KD0WHB
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.