I'm not sure if it can be adjusted independently. Since that function is for sending paging tones instead of control tones it's logical that the amplitude is fixed. Maybe Jim or one of the other developers will chime in. Another way I can think of would be to produce proper amplitude sound files in Audacity and use the same scripting to playback those files at the proper times. Brett KQ9N On Tue, Oct 8, 2013 at 7:47 PM, Thor Wiegman <n7jct@aplaceonthe.net> wrote:
This is outstanding. That will certainly get me started and I have much to learn. How is the amplitude of the tones set?
On 10/08/2013 10:43 AM, Brett Friermood wrote:
http://ohnosec.org/drupal/node/94
This should get you started. Some scripting, either internally via the Event Management Subsystem or externally in Linux, should be able to get you what you want.
Brett KQ9N
On Tue, Oct 8, 2013 at 12:02 PM, Thor Wiegman <n7jct@aplaceonthe.net> wrote:
Greetings:
Is app_rpt capable of being configured for tone remote signalling? If so, how do I set that up?
I am going to interface to a MASTR III that is connected to other tone remotes also. I'm setting up to drive an external tone panel right now but it strikes me that this really shouldn't be necessary since the control tones could be generated and mixed within app_rpt.
73 DE Thor Operator of N7JCT _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users