With the node-generated test tone, you are supposed to set the levels to produce 3KHz deviation (not including CTCSS). JIM
Date: Mon, 5 Dec 2011 13:10:51 -0500 From: bdboyle@bdboyle.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] another question: receive level from connected nodes
Been digging through the archives...and haven't found an answer to this, so I thought I'd throw it out to discussion...
I have 4 nodes connected up to a local hub. All the levels are set properly (own an oldish service monitor, so...can see the modulation levels of the ctcss and voice nicely. Local wideband nodes are set for 3.2K w/650 hz ctcss (except for the narrowband 900, which totals out around 2.7k.
Now...when the audio comes in from the net I'm connected to, however...the modulation is a lot louder; peaking up to 5K. (my node is connected to another hub node, so, in essence, we have 2 back to back hubs, one taking care of central NJ, mine dealing with eastern PA.)
Just wondering...how to set the level so the inbound audio from the networked nodes is a little less...um...'sprightly'.
Would this be handled in my usbradio_tune_usbhubnode.conf thru radio-tune-menu or...somewhere else?
-- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me.
Sent from my MacBook Pro. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users