Is you box on a static IP or DHCP? The default install puts the box on dhcp. After you load the sw then set the box to a static ip. If the bnox is on dhcp you will beable to connect out but inward forwarding doesnt work because the box is not on the ip configured in the router. I see you node is reporting. Can you ssh into the box from another pc? Jon VA3RQ On 9/13/2014 2:45 AM, wade wrote:
Good evening all,
I have been dealing with an issue for about a month now of nobody being able to connect to me, either from AllStar or Echolink. I can connect to them by radio or using the CLI and it works perfect. Audio is passed back and forth no drops, nothing. But no one can connect in. About 2 weeks ago I was forced to do a complete system reinstall due to a bad streaming install attempt. I thought maybe that would fix my incoming issue also. It did not. I can ping Google and everything is great, no packets dropped. During the course of this investigation I have gone through my router numerous times and the port forwarding is correct, UDP 4569 for AllStar, UDP 5198-5199 and TCP 5200 for Echolink. This setup has worked flawlessly for months after I set it up in it new location then it just quit.
Any ideas that maybe I haven't thought of or maybe something to jar my memory?
I also have had this message coming across the CLI constantly.
"Warning aprsthread: server noam.aprs2.net cannot be found"
That was a short description as I can not copy and paste it to the computer I use to email from.
I have tried "rotate.aprs.net" and "rotate.aprs2.net" also with no success. Could the two issues be related at all?
I would appreciate any help that can be given. I think it is something so basic I am just over looking it and I hope it is. But I wanted to run it past the experts to see if you guys had any other ideas
Thanks Wade KCØMLT Node 28757
--- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.