Isnt there something in part 97 about max speed for CW id?
Date: Sun, 15 Dec 2013 15:30:28 -0600 From: ars.w5omr@gmail.com To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Speaking of CW IDs
On 12/15/2013 03:25 PM, Mike/W5JR wrote:
So, there is a "speed=" in the morse stanza. Does it have a governor on it to limit the speed maximum to 20 wpm? My entries greater than 20 make no difference. And why would I want faster than 20 wpm you ask, my HUB nodes are only send "ID" to web transceivers, and I would like them faster. I have observed that at 20 wpm, there is a bit of jitter and faster may not be possible. (An ID I built years ago had a limit on how fast it could go before the code elements were overrun by timing)
I've been meaning to ask that same question.
Rules wise, since there's no CW requirement *at all* for 'any' license, then there shouldn't be a speed limit on how fast repeater id's should be limited to.
I like my code speed around 30~35wpm these days. I used to copy NTS traffic at 40+wpm. 20wpm is such a '~*yawn*~' bore...
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users