even if you are not voting, but using an RTCM, you need the voter.conf file, since that is where the configuration for the RTCM is kept that is used by chan_voter. -- Bryan Sent from my iPhone 5...No electrons were harmed in the sending of this message.
On Oct 29, 2014, at 00:35, Jim <jimw7ry@gmail.com> wrote:
Thanks but not voting. Only one RTCM will be used. So I can eliminate the site 2 and 3 I assume? Do I need a voter.conf file? Thanks 73 Jim W7RY
From: Tim Sawyer Sent: Tuesday, October 28, 2014 9:05 PM To: Jim Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Non Voting RTCM (just a basic node) On ExistingServer
Only one line changes in rpt.conf, the rxchannel= line. Like so:
[1234] rxchannel=Voter/1234
Then you need a voter.conf like so:
[general] port = 667 password = BLAH utos = y buflen = 250
[1234] Site1 = passwd1,transmit Site2 = passwd2,transmit Site3 = passwd2,transmit
No, you don’t need a C-name for your server. Just a plain ‘ol dot notation IP works fine (i.e. 192.168.1.10)
Easy, no? -- Tim :wq
On Oct 28, 2014, at 3:32 PM, Jim <jimw7ry@gmail.com> wrote:
Gang... I have an existing server and node running on a PC at my repeater site. The IP is static.
I want to set up an RTCM at home that runs from the server described above. Could someone please send me a rpt.conf file that has such a setup please? Reading the RTCM manual, it’s looking for a DNS entry for the hosting server. I don’t really need to use DNS if my server runs static IP? So any tips on setting up the RTCM networking would be helpful too.
I have moved the node from it’s own server to the server at the repeater site on allstarlink.org.
Hooking and interfacing to the radio is the EASY part. The config not so much.
Any help or tips would be appreciated!
Thanks! 73 Jim W7RY
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.