For starters, upgrade to SVN sources: https://allstarlink.org/support.html#astupgrade Then read the configuration info in either: http://206.212.254.21/unode_docs/rtcm_%20manual.pdf Or https://allstarlink.org/votersystem.pdf As I recall, there are some more-or-less real-world examples in there that will get you in the ballpark. Jim WB6NIL Date: Fri, 14 Jun 2013 22:59:23 -0700 From: paulschlaterradio@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Simplest voting configurating? Good Evening Group, What is the easiest process for taking an out-of-the box ACID installation and configuring an app_rpt and chan_voter to act as a voting server for three RTCMs sitting on a LAN? I know that this is a very broad question, but even for linux and asterisk newbies, there seems to be more than one "right way". Any help will be greatly appreciated, and be going to a charitable cause. Thank you, Paul _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users