---------- Forwarded Message ---------- Subject: Re: [App_rpt] Telemetry tones change? Date: Monday 09 October 2006 19:13 From: Steve Rodgers <hwstar@rodgers.sdcoxmail.com> To: pcfrover@tcomeng.com Gary, I just tested this on my system, and it works as advertised I can switch these two statements in rpt.conf: ;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000); remotetx=|t(2000,0,50,3000)(0,0,80,0)(1000,0,50,3000); Restarting asterisk or doing "rpt reload" after changing the lines above will cause the remotetx courtesy tone to change. Could you be confused about the function of the remoterx and remotemon courtesy tones defined in the telemetry block? The remotetx courtesy tone is that courtesy tone which is sent when an internet link to a node (remote base or repeater) is connected in trancieve to a remote node on the node you are coming in on from the radio. The remotemon courtesy tone is that courtesy tone which is sent when an internet link to a (remote base or repeater) is connected in monitor to a remote node on the node you are coming in on from the radio. The repeater courtesy tone to play when unlinked (no repeaters or remote linked) is determined by the unlinkedct setting in the node configuration block. This is set to point to ct1 in the default rpt.conf configuration file. It can be set to point to any courtesy tone defined in the telemetry block. Finally, there is one last courtesy tone which is used only for the remote base when it is in tranceive mode and is played following the remotetx courtesy tone when there is a remote base connected to the node you are coming in on AND it is in tranceive mode. This is the remotect setting in the node configuration block. This is set to point to ct3 in the default rpt.conf configuration file. It can be set to point to any courtesy tone defined in the telemetry block. There are no other courtesy tones for the remote base which can be changed in the latest version of app_rpt.c Hope this clears up any confusion. Steve WA6ZFT On Monday 09 October 2006 16:47, Gary Young wrote:
Remotetx is the one I wanted to change.
The only way I can make a change is to change the tone definitions in app_rpt.c, then make a new install, then put the same new tone definitions in the rpt.conf file, and it will work.
Way to much work... Why are there tone definitions in rpt.conf if they don't change anything?
Any other way I tried it gives me NO tones.
What do you mean by ct1? Can't I select the unlinked ct by using this statement?
unlinkedct = ct4
Gary
-----Original Message----- From: hwstar@rodgers.sdcoxmail.com [mailto:hwstar@rodgers.sdcoxmail.com] Sent: Monday, October 09, 2006 11:49 AM To: pcfrover@tcomeng.com Subject: Re: [App_rpt] Telemetry tones change?
Gary,
Which tones did you change? CT1, remotetx, and remotemon are the only ones relevant at this point.
From: "Gary Young" <pcfrover@tcomeng.com> Date: 2006/10/09 Mon AM 11:26:19 PDT To: "'Asterisk Repeater Controler'" <app_rpt@lists.illiana.net> Subject: [App_rpt] Telemetry tones change?
Is it true that in order to change the frequencies of the
telemetry tones, I
have to change them in app_rpt.c then re-make asterisk?
Changing the tone frequency definitions in rpt.conf did
nothing even after
an asterisk restart.
Gary
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
-------------------------------------------------------