Actually this has been a long time issue on all platforms that would happen from time to time. In fact it would send the push to talk to the entire network of connected nodes. And what you described is exactly the workaround. Lu Vencl KA4EPS
On Feb 8, 2016, at 13:07, dropbox@digitalattack.org dropbox@digitalattack.org <dropbox@digitalattack.org> wrote:
hardware: raspberry pi 2b with uri
problem: raspberry pi 2b not seeing **** rx un-key if ptt released too quickly after final dtmf digit. I can repeat the issue by connecting to a node then: push ptt,*,7,1,release ptt. if i pause before releasing ptt then all is fine. if i release ptt immediately or same time as last dtmf digit then **** rx un-key is missed. i verified COD and did see the signal go from hi to low to the uri and didnt see the **** rx un-key in app rpt debug level 7.
any suggestions?
thanks, Gregory, KK6DOI _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.