That did it, thanks Steve :) I was an idiot and commented it out in the install script, not realizing that was only if it was for a hub... DOH! lol.. thanks again :) 73 Stephen K1LNX On Mon, Apr 11, 2016 at 8:22 AM, Steve Zingman <szingman@msgstor.com> wrote:
echo snd_pcm_oss >>/etc/modules either modprobe snd_pcm_oss and check for /dev/dsp or reboot.
73, Steve N4IRS
On 4/11/2016 8:12 AM, Stephen - K1LNX wrote:
Hi guys, I bought a new (more modern) system for my AllStar activities, installed Debian Jessie x64 and ran Steve Zingman's install script from his github page ( <https://github.com/N4IRS/AllStar/raw/master/platforms/x86/jessie/x86_allstar_asterisk_install.sh> https://github.com/N4IRS/AllStar/raw/master/platforms/x86/jessie/x86_allstar...), I use an original URI (no URI-X).
It compiled installed just fine, so I moved over the configs in /etc/asterisk from my old install to the new, but for some reason whenever I launch the asterisk console, I get these error messages scrolling consistently:
[Apr 11 08:08:30] WARNING[971]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 1 (usb): No such file or directory
I removed the simpleusb_tune_usb.conf, re-ran simpleusb-tune-menu to generate a new config, restarted DAHDI, Asterisk, and rebooted etc, but the issue remains regardless.
I dug around in the source to find the relevant line as referenced, but I'm not up to snuff on C code, but did spot something about /dev/dsp, I looked in my /dev directory and there are no dsp entries so that might be part of the issue? I also disabled the onboard sound in the BIOS to prevent any potential conflicts.
Anyone have any ideas? I can't quite put a finger on it.
tnx and 73 Stephen K1LNX
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic