Mike, I would think so. I am not a Linux person myself, but I guess it is how the Centos addresses I/O request. 7 3 de Angelo ----- Original Message ----- From: mike@midnighteng.com To: app_rpt-users@ohnosec.org Sent: Monday, September 09, 2013 6:03 PM Subject: Re: [App_rpt-users] USB Printer Port Should be no reason that a USB/PP would not work with this if it is properly addressed (i.e 378,278,3bc) in your configuration. While I have not used them with apt-rpt specifically, I have used them with controller software that I wrote years ago. ...mike/kb8jnm -------- Original Message -------- Subject: [App_rpt-users] USB Printer Port From: "K&R Yoksh" <yokshs@gmail.com> Date: Mon, September 09, 2013 6:45 pm To: app_rpt-users@ohnosec.org I think that Angelo is speaking about USB->Parallel adapters being used on computers that lack a physical parallel port. I believe that this question has come up before, and the answer was NO, it doesn't work. I recommended using a PCI parallel port card, but Angelo is working with a laptop. 73, Kyle K0KN Olathe, KS Allstar 2210-2219 --- Original Message --- I was wondering if anyone has tried a USB Printer interface with the PRLP interface with Asterisk??? Does ACID address the USB adapter??? 7 3 de Angelo ---------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users ------------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users