The file is beagle_tune_1.conf Where 1 is name of interface... Or do this 1) Use putty to login then type asterisk -r 2) type beagle tune hit enter You will get which interface and the rx & tx value. 3) type beagle tune rx (0-999) hit enter it should show the new setting... 4) Important type beagle tune save and hit enter otherwise it won't take new setting. 5) type beagle tune tx (0-999) hit enter it should show the new setting.... 6) repeat no. 4 above 7) type beagle tune rxdisplay hit enter and you'll get 3-5khz dev meter that will respond to RX audio... for adjusting or monitoring... Very cool. That's my story and I'm stickin to it... You could type help hit enter and you'll see all this listed Good luck with the little doggie Scott Kj6nro Allstar 29262 Tuolumne Calif temp down because of the fire :-( Allstar 29263 simplex Sonora Calif On Aug 25, 2013, at 2:54 PM, C B <harvard5362@yahoo.com> wrote:
Hi
Is there anyway to change the levels that the beagleboard / LOX put out and take in?
Is there a conf file that can be edited?
Chris _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users