Some prefer to have the networking connections managed by a network manager such as wicd. I prefer to have full control over my network connections and manually configure with ifconfig, iwconfig, and wpa_supplicant depending on specific connection. I you would like to go the manual route install the wireless-tools package. If you are using a secured wireless network, above WEP, you will need to use wpa_supplicant. Many tutorials and other articles available on the internet to learn how to use them. If you would like to go the automatic route you will need to either install a manager of your choice or use any pre-installed one. It appears you are using Doug's image and I am not sure if there is network manager installed by default or not. Brett KQ9N On Tue, Nov 15, 2016 at 12:51 AM, Jerry Gainer <jerald.gainer@gmail.com> wrote:
OK! let me tell you some things. I have an image of Asterisk software on my Raspberry Pi-3 model B. I have a node for the 2meter system which I’m working with first.
I’m using a kenwood V71 for a radio and it had a data port that comes out of the back and goes to the DMK and the DMK connects to the Pi-3B. I used an HDMI cable from the Pi-3 to my TV. I was able to type on my wireless keyboard to run (/usr/local/sbin/firsttime.sh). This let me put in my 2meter node number. If later I need to update something I can run (/usr/local/sbin/netsetup.sh).
How do I get the Pi-3 on internet? It has wifi but I need to connect it to the house system? I have not found how to do that with Asterisk software.
Jerry Gainer, KC7GOL
14860 Chaparral Loop West
Peyton, Colorado 80831
Cell Phone: 719-660-0603
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.