Mine is x86 sent via smoke signal (AT&T) On Tue, Apr 10, 2018 at 8:14 AM -0400, "Nate Hardman" <nhardman1428@gmail.com> wrote: What system is this? Raspberry Pi? Server? Desktop? Laptop? VM? On Mon, Apr 9, 2018 at 11:18 PM, CHARLES BENN <cbenn7@verizon.net> wrote: I should have been a bit clearer in describing my problem. I am trying to use the install menu asl-menu.I follow the menu prompts enter the info, highlight Save and hit ok . it seems to go but does not change, the same happens if i try to change the name from repeater to something else. All the install info Node number , my call and password entered ok, the box will connect and register but I am unable to change from DHCP to Static.I tried using both the root log i and the repeater log in from the console with the same results. ThanksCharlie WB2SNN _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Nathan Hardmannhardman1428@gmail.comN8THN@ARRL.NET