Boy, that should completely confuse the poopies out of anyone :-). Jim From: vencl@att.net To: donh@sigma.net Date: Sun, 7 Oct 2012 22:28:05 -0400 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1 All,Thanks for the tips. I have been out of town so I was unable to follow along, but Jim was kind enough to take a look at my new node I just installed from the ISO and he had to re-compile Zaptel.So to others out there that are having this issue, you might take a look at this.Why this is required on a new install I still do not understand, I have never had to do this before, but for those like me that have no idea how to do this, Jim suggested to “re-installed from SVN sources or something like that” should take care of it. I have been able to do SVN updates via /etc/svnupdate/svnupdate.sh on my other nodes, but I don’t see this on the new install, so I think I have to copy that over first, unless someone can please advise the correct or alternate procedure.Or you can re-compile Zaptel. In looking at the history of what he did, please look below as this should offer a clue. Or course some of the commands may not be needed, but again just trying to help newbies (like myself) along.Thanks again Jim for your help today. 2 chkconfig zaptel off 3 chkconfig asterisk off 4 asterisk -r 5 sync 6 reboot 7 service zaptel start 8 asterisk -vvvvcn 9 service zaptel stop 10 cd /usr/src/astsrc/zaptel/ 11 make install 12 make clean 13 make install 14 service zaptel start 15 asterisk -vvvvcn 16 chkconfig zaptel on 17 chkconfig zaptel off 18 sync 19 reboot 20 asterisk -r 21 asterisk -vvvcn 22 ntsysv 23 history 24 sync 25 reboot From: Don Hackler [mailto:donh@sigma.net] Sent: Saturday, October 06, 2012 12:53 PM To: Lu Vencl Cc: app_rpt-users@ohnosec.org; 'Scott Weis'; 'Steve Agee' Subject: Re: [App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1 I had the same thing… about 5 minutes later asterisk would finally stay up, but there would be other problems when I would try to make connections to radios work. One way audio, among other things. I spent a few days trying to troubleshoot it.When I finally did a fresh download and re-installed from scratch, everything just came up and worked as expected. The other problem I had with that bad disk was the dictionary package was missing, so when you tried to set thepassword during the install, the root password wasn't getting set, so I would have to boot it in single user mode and force a password into it. On Oct 6, 2012, at 4:41 AM, "Lu Vencl" <vencl@att.net> wrote: Very interesting.. I will try that and report back..The odd thing is that Asterisk will eventually start, but it takes about 5 minutes or so to settle down.KA4EPS From: Don Hackler [mailto:donh@sigma.net] Sent: Saturday, October 06, 2012 3:00 AM To: app_rpt-users@ohnosec.org Cc: Lu Vencl; Scott Weis; Steve Agee Subject: Re: [App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1 When I had this problem, I tried to install a few times and kept coming up with this error. I had to download a fresh copy of the install CD tocorrect the problem. There was a subtle problem in the downloaded bits on the first CD. On Oct 5, 2012, at 10:44 PM, Steve Agee <n5zua@earthlink.net> wrote: I'm having this issue as well on a fresh install. The machine is 64 bit: [Oct 5 22:42:47] ERROR[23279] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options: 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them. 3. If you need Zaptel services, you must correctly configure Zaptel. mpg123: no process killed Asterisk ended with exit status 1 Asterisk died with code 1. Automatically restarting Asterisk. N5ZUA ----- Original Message -----From: Scott WeisTo: 'Lu Vencl' ; app_rpt-users@ohnosec.orgSent: Friday, October 05, 2012 9:23 PMSubject: Re: [App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1 Your system most likely updated it’s kernel.. So you need to rebuild/install zaptel. From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Lu Vencl Sent: Friday, October 05, 2012 9:42 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] mpg123: no process killed - Asterisk ended with exit status 1 Anyone know why a new node I just built goes through several of these before settling down after a reboot?I have hear this complaint from someone else before, but he can’t remember what he did to fix his node.ThanksLuKA4EPS Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users___________________... App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users