You may have a USB pointing problem between asterisk and Linux. On boot up type "service asterisk stop" at the command prompt Type lsusb at the command prompt. [root@Xxxxxx~]# lsusb Bus 004 Device 004: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller Bus 004 Device 001: ID 0000:0000 Bus 004 Device 002: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller Bus 001 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Then make sure your tune files ( in /etc/asterisk) properly point to your USB device such as a URI in devstr= (see below example) [root@xxxxx asterisk]# cat usbradio_tune_usb<node#>.conf [usb27178] ; name=usb<node#> ; devicenum=1 devstr=4-2 ; Bus 004 Device 002: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller rxmixerset=125 txmixaset=500 txmixbset=500 rxvoiceadj=1.820479 rxctcssadj=0.500000 txctcssadj=0 rxsquelchadj=825 Correct the tune file then At the command prompt type: service asterisk start Thanks, Bob kk6ecm Sent from iPad
On Aug 26, 2015, at 5:48 PM, chris <ckw@gci.net> wrote:
Hello Again. I failed to mention The Allstar server is running ACID. After boot up It repeats the following , (asterisk) did not claim interface 3 before use. Forgot where to fix this. Thanks again.
Chris Allstar node 42264 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.