Yes, you got me, I did not touch link_functions, which in my case just had set to functions. Thanks On Sun, Jun 5, 2016 at 6:22 AM, <mike@midnighteng.com> wrote:
I can't reproduce the problem.
But, if I were to take a wild guess at this, I am going to guess that you are describing parameters in your functions stanza that should be outside of it in the general node setting area.
So look at it closely for such a error.
...mike/kb8jnm
Can anybody test this on their node to see if it does the same thing? Just rename the functions stanza to functions_something and then rename functions = functions to functions = functions_something. Then see if you can remote control it from another node.
I am running app_rpt version 0.325 10/19/2014
On Tue, May 31, 2016 at 8:01 PM, Skyler F <electricity440@gmail.com> wrote:
Node 1002 is a remote Allstar node on different hardware. In my case, I tried it on a few different public Allstar nodes but I am just using the numbers 1002 and 1001 as a generic example.
On Tuesday, May 31, 2016, David McGough <kb4fxc@inttek.net> wrote:
Skyler,
Okay about being connected and still no-go.
Are nodes 1001 and 1002 on the same host or different hardware?
73, David KB4FXC
On Tue, 31 May 2016, Skyler F wrote:
David,
I do have the nodes connected together. The only difference is the
name
of
the functions stanza.
On Tue, May 31, 2016 at 7:27 PM, David McGough <kb4fxc@inttek.net> wrote:
Do you have node 1002 connected to 1001 before issuing the remote
command
from to 1001 from 1002? The nodes must be connected for remote commands to work.
Also, I don't think it's saying "I OWN COMMAND" ....Rather, it's saying:
https://www.youtube.com/watch?v=0ccKPSVQcFk
73, David KB4FXC
On Tue, 31 May 2016, Skyler F wrote:
Is this a bug or am I not supposed to do this in app_rpt? :
Under my node this works fine:
[1001] functions = functions
[functions] DTMF stuff here
IF I do this however,
[1001] functions = functionsVHF
[functionsVHF] DTMF stuff here
Everything works EXCEPT if I do a remote command from another node, so if I am on node 1002 and do *41001, it will say "I OWN COMMAND" but I can not execute any DTMF successfully. If I do *41999 *70, I don't hear Allison's pretty voice :-(
73 Skyler KD0WHB
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com