Hopefully a simple question, setup a new node today, full duplex repeater, with full duplex in simpleusb.conf set to 1, duplex set to 2 in rpt.conf. 50sec Hangtime and courtesy tone as well. When someone keys up and says 123, Then Unkeys he hears himself say 3. Is this something fixable in software? Incorrect configuration maybe? Thanks Bryan Vo1mxz Sent from my iPhone
On Jan 22, 2018, at 12:16 PM, Loren Tedford <loren@lorentedford.com> wrote:
Here is what i get from my repeater site
root@rpt:~# dahdi_test -c 100 Opened pseudo dahdi interface, measuring accuracy... 99.996% 99.997% 99.991% 99.997% 99.998% 99.995% 99.998% 99.989% 99.996% 99.995% 99.997% 99.996% 99.996% 99.998% 99.996% 99.999% 99.995% 99.996% 99.996% 99.993% 99.996% 99.996% 99.996% 99.999% 99.993% 99.997% 99.996% 99.996% 99.996% 99.996% 99.996% 99.996% 99.995% 99.995% 99.987% 100.000% 99.993% 99.996% 99.997% 99.990% 99.997% 99.995% 99.997% 99.997% 99.995% 99.998% 99.995% 99.996% 99.997% 99.995% 99.999% 99.994% 99.995% 99.999% 99.995% 99.996% 99.987% 99.996% 99.997% 99.995% 99.997% 99.995% 99.996% 99.997% 99.994% 99.997% 99.998% 99.994% 99.997% 99.998% 99.999% 99.992% 99.996% 99.998% 99.991% 99.997% 99.989% 99.996% 99.997% 99.996% 99.997% 99.988% 99.997% 99.998% 99.994% 99.998% 99.995% 99.997% 99.996% 99.996% 99.996% 99.995% 99.998% 99.996% 99.995% 99.996% 99.995% 99.997% --- Results after 98 passes --- Best: 100.000% -- Worst: 99.987% -- Average: 99.995637% Cummulative Accuracy (not per pass): 99.996 root@rpt:~#
Here is what I get from the Data Center Hub.. Not yet aware of any issues but maybe i do have some thing going on too..
root@uhf:~# dahdi_test -c 100 Opened pseudo dahdi interface, measuring accuracy... 99.612% 99.607% 99.609% 99.612% 99.998% 99.994% 99.610% 99.607% 100.000% 99.158% 99.152% 99.999% 100.000% 99.998% 98.729% 98.730% 99.611% 99.608% 99.999% 99.994% 99.997% 99.996% 99.997% 100.000% 99.999% 99.608% 99.994% 99.614% 99.994% 99.999% 99.616% 99.609% 99.997% 99.993% 99.998% 99.998% 99.998% 99.617% 99.611% 99.611% 99.998% 99.607% 99.994% 99.991% 99.998% 99.998% 99.997% 99.994% 99.997% 99.615% 99.999% 99.607% 99.999% 99.997% 99.607% 99.994% 99.604% 99.998% 99.998% 99.995% 99.997% 99.996% 99.999% 99.998% 99.995% 99.992% 99.623% 99.609% 99.612% 99.611% 99.988% 99.628% 99.612% 99.615% 99.612% 99.616% 99.613% 99.999% 99.995% 99.998% 99.615% 99.612% 99.994% 100.000% 99.996% 98.104% 98.102% 99.999% 99.591% 99.605% 99.980% 99.999% 100.000% 99.996% 99.999% 99.996% 99.998% 99.998% --- Results after 98 passes --- Best: 100.000% -- Worst: 98.102% -- Average: 99.781178% Cummulative Accuracy (not per pass): 99.998 root@uhf:~#
I hope this helps.
Loren
On 1/22/2018 7:36 AM, Pierre Martel wrote: dahdi_test -c 100
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.