Stephen Rodgers wrote:
The timing of the CTCSS and carrier is configurable in usbradio.conf. See the reference for "chicken burst".
<-- Hi Steve; Yes, I have seen that and do have 'txtoctype=notone' the problem is the slow response time of the decoders in most amateur transceivers - i.e., we still hear a squelch crash on the receiver. So my question is whether the timing between drop of PL and drop of carrier is user configurable? As I write this note (sitting on the train), I wonder whether the value of unkeywait in the wait-times stanza in rpt.conf would extend the delay...
Regarding separation of audio. There is not that much granularity in the system. Basically, the voice band information (voice, courtesy tones, ID's, etc.) is all lumped together, and the CTCSS subaudible tone can only be split off. To do what you are asking for would be a major architectural change.
<-- OK don't worry about it :)