I am assuming that your remote radio is in carrier squelch or that the PL decoder gives an active low. If that is the case it's working exactly as I would expect. Is the remote node a voting receiver or just a simplex station? If it has its own separate node number from your repeater it should be able to disconnect from the repeater. From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Fran Sent: Tuesday, January 29, 2013 8:53 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Repeater hangs whn remote node (RTCM) My repeater hangs in transmit whenever my remote node (simplex ) radio loses power, the sim,plex node is connected to an RTCM. I have tried several commands to disconnect the Node to npo avail. I end up shutting my Allstar server off until the remote node power is is restored. Just to clarify what is happening at the remote node, the simplex radio loses power NOT the RTCM..... Frank