No more than 10 minutes after I wrote this email I found a post that outlined the problem I was having... Needed to load usbradio in modules.conf and now all is well... Sorry for the wasted bandwidth... -Joe KA3NAM On 10/23/2016 9:29 PM, Joe Bennett wrote:
Just got dial up and running with a Pi3. Initial setup looks good and it has registered with the Allstar network. Now I'm trying to use the radio-tune-menu command but all I get is this:
root@repeater:/etc/asterisk# radio-tune-menu Error parsing device parameters root@repeater:/etc/asterisk#
I've checked that the rpt.conf and the usbradio.conf files are aligned in what the USB device (URI) is called (usb28073):
rpt.conf:
[28073] ; Change this to your assigned node number
rxchannel = radio/usb28073 ; Rx audio/signalling channel
usbradio.conf:
[general]
[usb28073]
eeprom = 0 ; EEPROM installed: 0,1 ; 0 = no (default) ; 1 = yes
What am I missing???
-Joe
KA3NAM