Thanks Mike I have learned the hard way. On xipar... ( when I was trying to make all this run on a dual core machine)... I crashed my install 3 time before I finally understood... Now I have 2 disk on the machine. One is a 80 gig maxtor where I copy my whole install with sysrescuecd and the running drive is a 40 gig drive.. If I want to test something I run the back up. Then do the mod, then when I see the I did goof. I restore the 40 gig with the 80 gig stuff.. At the same time I copy my config files to the 80 gig as soon I am happy with them.. I the last 2 week I did about 30 install of centos with various stuff to make my dual core machine work either on xipar or with the svn of acid.. Never been able to have a systemrunning with out lots of problem.. So back to the basic, simple P4 and a trusty acid cd... I found out the cop command for parrot in the app-rpt source... Now need to understand the stanza stuff in rpt.conf to enable it. Next will be the dtmf tone check.. The night will be short ;-))) Envoyé de mon iPad Le 17 Mar 2013 à 21:45, mike@midnighteng.com a écrit :
Thought I would warn you... I have used webmin with my phone PBX for a many years. Do yourself a favor and do not update webmin despite what the interface tells you about modules that need updating.
You will find many of those modules are also used by asterisk and can cause asterisk to not function correctly because the are not the expected versions to act the specific way your asterisk version expects.
You will not find out until the next boot after you update. Luckily, if you keep all of your config files on another machine, it's easy to re-install and through your conf files and scripts back on and your flying again.
I use webmin on the radio pbx also, I just don't update it. Update only what you need for asterisk through asterisk. Yum update xxx etc...
...mike/kb8jnm
-------- Original Message -------- Subject: [App_rpt-users] Ok back to Acid, now what?? From: "Pierre Martel" <petem001@hotmail.com> Date: Sun, March 17, 2013 9:02 pm To: "APP RPT" <app_rpt-users@ohnosec.org>
OK I got my P4 2.66 ghz working with acid.
was piece of cake and now both my node are online and working, even echolink is working!
I did something that maybe Jim wont like, I have loaded webmin. I like the thing, and its much more easy for my pal that dont understand Linux CLI to do some command quick and easy..
But now I want to do more stuff..
Since this machine will replace an RC-210 I want to know how to have voice ID every 20 miute or so.. I did read a few stuff about cron job for audio ID but it was for server with one node, I have 2, and I dont know if it would still be ok to use that..
And forgot bout this, Our club user are mostly french, I know there are french voice package for asterisk, but I am not sure if I could use one for the message that asterisk do , like connect disconnect and such.. would it be as simple as switching the audio file in the good directory or it would be much more complicated?
Is there a Parrot mode with acid? saw it on xipar but I never seen anything about in with acid..
Thanks for your time, i know I ask a lot..
Like I said once ,I dont need the job done for me, just point me in the right direction and I will try to fill the gap.
Pierre VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users