Yes the D700A just needs a serial cable (although it needs to be female-female straight thru, cause they used the wrong sex connector on the Kenwood radio). Yep 9600 baud packet mode is perfict. You will need to feed the URI output through the 2X amplifier since the Kenwood takes boat-loads of audio to modulate it properly. Set carrier detect and rxctcss to dsp and txmixa to voice. The radio makes its own CTCSS on transmit. I believe the V7 is the same as the TMG707 so it needs the magic circuitry. ----------------------------------------
From: jann@gmx.de To: app_rpt-users@qrvc.com Date: Tue, 9 Mar 2010 00:08:02 +0100 Subject: [App_rpt-users] Kenwood Remote TRX
Hi,
I have seen in svn revision 565 of app_rpt.c the new "support for Kenwood TM-D700A as a remote". Do we need a special interface (like the TM-G707 needs) or can we simply use a serial cable? Does the dedicated DATA connector in 9600bps Packet Radio mode fit our needs for "flat" audio? Where can I find the informations which has been required to implement this feature?
I have another radio from Kenwood (TM-V7) and a selfmade programming cable for the memory store. Could this be another transceiver for a remote controlable station?
Tnx, 73, Jann
-- Jann Traschewski, Drosselstr.1, D-90513 Zirndorf, Germany Tel.: +49-911-696971, Mobile: +49-170-1045937, E-Mail: jann@gmx.de Ham: DG8NGN / DB0VOX, http://www.qsl.net/dg8ngn, ICQ UIN: 4130182
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users