Jim, Unknown. This is uncharted territory. It may or may not work. I have no way to test chan_irlp as I do not have an IRLP node and chan_irlp is not technically supported by ACID yet. Besides not having an IRLP node to test, all chan_irlp installs are somewhat cumbersome to do at this point, so I have not devoted much attention to it. Steve WA6ZFT nessenj@jimsoffice.org wrote:
I don't know if I asked.this or.not, but what will this upgrade procedures do to us that are also running chan_irlp?
Jim / K6JWN
------Original Message------ From: Stephen Rodgers Sender: app_rpt-bounces@lists.illiana.net To: Asterisk Repeater Controler ReplyTo: Asterisk Repeater Controler Subject: [App_rpt] ACID update procedure to install latest version ofAsterisk Sent: Oct 11, 2008 8:56 PM
A later version of asterisk is available for ACID installs.
These upgrade instructions must be followed to the letter.
1. Change directories to /root
2. If you don't have an astupd.sh file STOP. Your ACID install is too old and you will need to do a fresh install which will install the latest version automatically. If you have to re-install, make a backup of your config files in /etc/asterisk so that you can restore them to the new install.
3. If you have an astupd.sh file, you will need to update it by downloading a new version. Use the following wget command from the /root directory to do this:
wget http://dl.allstarlink.org/installcd/astupd.sh
4. Once the new script is downloaded, type:
../astupd.sh
5. Your system will now be updated. Wait for the download and compile to complete.
6. Reboot your system and check to see that your node is functioning properly.
Steve WA6ZFT
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
Sent from my Verizon Wireless BlackBerry _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt