Sorry, replied on the wrong thread... Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes" ----- Original Message ----- From: "Robert A. Poff WB3AWJ" <wb3awj@comcast.net> To: "Bill Hurlock" <bill.hurlock@cpcomms.com> Cc: "app rpt-users" <app_rpt-users@ohnosec.org> Sent: Thursday, February 21, 2013 1:49:35 PM Subject: Re: [App_rpt-users] Node ID no working Use the IaxRpt program. Look here : http://www.xelatec.com/xipar/iaxrpt And do what's here: http://www.xelatec.com/xipar/node/89 Works fine. In fact I also use it on Linux under Wine. Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes" ----- Original Message ----- From: "Bill Hurlock" <bill.hurlock@cpcomms.com> To: "app rpt-users" <app_rpt-users@ohnosec.org> Sent: Thursday, February 21, 2013 1:03:31 PM Subject: [App_rpt-users] Node ID no working I don't seem to have a working node ID. I have been listening for it since I got the node up 2 days ago but nothing heard. I can force it with a *80 command? Bill Hurlock CPCommunications 856-234-1661 Home Office 856-264-1010 Cell 914-345-9292 Ext.429 www.cpcomms.com WA2TQI Providing Solutions for Audio and Video Communications _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users