On 7/28/11 9:39 AM, Ed Wilhelm wrote:
Trying to help a friend get his Asterisk box up and running but having problems. His DMK Engineering URI is not being found. I can login and do lsusb and it's there, but asterisk app_rpt never finds it. Solid green led. I try to command radio active usb<node number> but when you check it says device not active. I wish I could try plugging in another URI but he is over 100 miles from my location.
Any ideas or suggestions?
Check that the line in usbradio_tune_usbxxxxx.conf is pointing to the correct USB port? If it isn't...well, strange things will happen...under devstr=X-Y where X is the usb bus for that channel, and Y is the specific device the dongle is connected to. use the command lsusb to see whether it's being detected by the kernel; you'll see: Bus 002 Device 002: ID 0d8c:013c C-Media Electronics, Inc. which will tell you where the dongle is...make the devstr= to the 2 numbers you see there, dropping the 00. At least, that's what worked for me... [usbxxxxx] ; name=usbxxxxxx ; devicenum=0 devstr=2-2 rxmixerset=438 txmixaset=530 txmixbset=500 rxvoiceadj=0.625000 rxctcssadj=2.436119 txctcssadj=140 rxsquelchadj=800 -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me.