On 5/26/15 8:05 PM, Corey Dean wrote:
I recently installed a spectra tac voter on my vhf repeater. Using the outputs in app_rpt I was able remotely disable each card if needed. That got me to thinking. There is an output for each card that will show if that card is voted. Could the event manager be able to see this and execute a command for it such as do a playback of a sound file so that the users know which receiver they are hitting? If so, would I be able to tell it to only do the playback (execute the command) only if there is no active signal? Basically if a user voted a few times in the same transmission, I wouldn't want it playing courtesy tones during his transmission if it changed receivers unless the COR dropped.
Thoughts? Suggestions? Is this doable?
This is something I've wanted to do, but I've yet to figure out a way to change the courtesy tones as they not not really a variable you can set and unset. I could very well be wrong about this, as it's been some time since I've looked at it. Anyone have ideas how to set CT's from the event subsystem? -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net