I run AllMon2 on a test node on the bench. I have not seen any issues. Just Basic DIAL RC1 and AllMon2. Steve On 3/16/2017 1:21 PM, Steve Agee wrote:
I'm wondering about the load Allmon2 is placing on the system. I know it is more efficient than the original Allmon, but I've never entertained the idea that the Pi3 could handle that much at once. Is anyone else running Allmon2 on their Pi?
N5ZUA
On 3/16/2017 12:17 PM, Steve Zingman wrote:
Bill, Thanks for a complete description of your system, that helps a lot. I did see Bryan's response about Wifi. I would say it's possible. Maybe a sustained ping to see if it's dropping packets. Do the dropouts happen on inbound network transmissions or receiver input or both? Since you are running SNMP, how is the CPU load? Which channel driver are you running?
73, Steve N4IRS
On 3/16/2017 1:06 PM, William Higgins wrote:
Good day!
We have recently replaced the CAT-200 controller on our repeater with a Raspberry Pi 3 running the Dial RC1 distribution. Mostly it seems to be working ok, but we are getting relatively frequent audio dropouts in the middle of conversations. At times we can go for several minutes of conversation without a dropout, and at other times, it seems like it happens a lot more frequently. Sometimes it's just for a couple of tenths of a second and sometimes it's up to a few seconds long. So far I have had no luck in trying to track down the cause of this. Any thoughts anyone might have about what might be happening or where to look next would be appreciated.
Some details about our config:
Raspberry Pi 3 with DIAL RAT_RC1.img Repeater Builder RB-USB Rim Lite Interface Vertex VXR-7000 Repeater Metallic case for the Pi Modular connectors and Cat-7 cable for the interface with snap-on chokes at both ends Pi is connected to the local network via Wifi (We are prepared to move this to Ethernet, but need approval of the host to do so) Pi is connected to an external server via OpenVPN for collection of mgmt. statistics via SNMP Pi also runs Apache2 and Allmon2 Echolink is enabled (Node 746074) AllStarLink of course (Node 44011)
Thanks in advance for any thoughts or help you might be able to give!
Bill Higgins N0NOE
KC0DBS repeater on 44011 N0NOE simplex on 43758
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.