Hello Jim,
Yep 9600 baud packet mode is perfict. You will need to feed the URI output through the 2X amplifier since the Kenwood takes boat-loads of audio to modulate it properly.
I checked the TM-D700 manual: "Output of detected 9600 bps data (500 mVP-P, 10 kOhm) -> Also functions as a common pin for 1200 bps and 9600 bps data output." RX seems the same as for 9600 baud packet mode. For TX i tried 1200 bps with a low setting of "txvoice" (radio tune txvoice 100). Seems to be another way without using the amplifier + txboost=1. Or am I wrong?
Set carrier detect and rxctcss to dsp and txmixa to voice. The radio makes its own CTCSS on transmit.
Yep, it works fine with iaxRpt for Windows. How can I change the inital frequency 146.580 MHz to another one? It is not a frequency for hamradio in germany. I found 146.580 MHz in app_rpt.c, but I hope there is another way to change it ;) Thanks! 73, Jann