Chris, This is buried at the bottom of : https://allstarlink.org/getstarted.html "The first time a server is downloaded must be done manualy with the 'download-portalconfig' script that was supplied with your ACID or Limey Linux distrubution. The script downloads a script from the configuration server, then runs that script, which asks for your Portal username and password, and prompts you to select which 'Server' you wish to download (or not, if you only have one), and then verifies that you want to proceed with the download, and then performs the download and the configuration of your system. Once downloaded, you must at least re-start Asterisk, or better yet, just reboot your system. Once the first manual download has successfully occurred, you can use the 'Download Server' option from the Portal's 'Server' drop-down menu. This causes the server to download the configruation, configure the system accordingly, and restarts Asterisk." (Note spelling errors are entirely the work of the portal, not mine) :) -Stacy KG7QIN On 9/30/2016 9:29 AM, Chris Viningre wrote:
When I install Dial on a laptop or Raspberry pi I get a failure to download configuration from allstar. I reinstall and manually configure and everything works. I would like to use the portal to configure but when I set it to download nothing happens on my allstar computer. Is there a command I need to set in a conf file? Is there a script I can run manually?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.