1. Have you tried inserting the ringing app in extensions.conf for the SIP extension? The SIP extension may not be indicating ringing to the channel used by app_rpt for the autopatch. 2. There is not be enough information here to suggest a solution. Are the repeater and simplex nodes on the same machine? Are they both USB fobs? What version of app_rpt is being run on both nodes? When in transceive, what does the CLI command rpt stats XXXX print when XXXX is the node number of the simplex node on the machine running the simplex node? Roger F. Jordan Sr. wrote:
Hi everyone.
I have a couple of issues I am trying to resolve.
1. When I make an autopatch from the repeater to an existing SIP extension on the system the repeater will not emit a ring sound. Everything else in the Patch works great both directions except no ringing when I dial out from the repeater.
2. When I link from the repeater to the simplex radio (transceive) the repeater stays in transmit mode. This is not a big issue. because when I link in (in monitor), the repeater seems to work ok.
Again, I bow to the OGWO's (Oh Great Wise Ones) of the Asterisk and APP-RPT Kingdom!
Best Regards,
Roger F. Jordan W4RFJ
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt