why did you set dusbabek to yes? Leave Lee out of this!!!! Jim From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Date: Fri, 11 Jan 2013 19:57:44 -0600 Subject: [App_rpt-users] Remote base using FT-817ND Hello group, I need help with a remote base setup using a Yaesu FT-817ND. I just setup a second node on my ACID box using an URIx for the remote base. Everything is working fine with tx audio, rx audio, COR and PTT. I am having issue with the CAT control. I connect from my UHF repeater node on the box using *3701 and try to issue remote base commands and the radio will not respond to CAT commands. Here is what I have in the rpt.conf [701] rxchannel = Radio/usb701 ; Rx audio/signaling channelremote = ft897 ; Radio Typefunctions = functions701 ; Function list from linkphone_functions = functions701 ; Function list from phoneioport = /dev/ttyUSB0 ; Serial port for controliospeed = 4800dusbabek = yesauthlevel = 0 ; Authorization level;; authlevel = 0 : Anyone can use it;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it;; authlevel = 2 : Requires log in, asks for it automously;mars = 0 ; set=1 for IC-706 w/MARS mods (optional) remote_inact_timeout=1800 ; Inactivity timer for remote base nodes only (set to 0 to disable).remote_timeout=5400 ; Session time out for remote base. (set to 0 to disable);remote_timeout=120 ; Session time out for remote base. (set to 0 to disable);remote_timeout_warning=30 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users